Tint Haus Customs - Ceramic Coating, PPF, & Viny Wrap

Pricing transparency matters more than the cheapest quote — a clear written estimate beats a vague round-number bid. Use this page to prep a call with Tint Haus Customs - Ceramic Coating, PPF, & Viny Wrap in Fort Lauderdale, FL. It maps public-source signals against questions that usually decide a window tinting job fit. Public-source signals for this window-tinting listing surface 5 cues: no bubbles, uv protection, heat rejection, premium film brand, paint protection film. Use them as the anchor of the dispatch conversation, not as a guarantee of crew skill. Use-case alignment: Automotive ceramic tint and heat rejection; UV protection and interior fade reduction. Starting frame for the call — not a guarantee of pricing, availability, or technician skill. Ask whether the provider leaves a written report after each visit listing what was done, what was found, and what to watch next. Without that, the next provider has to re-diagnose from scratch. Treat the writeup as orientation, not vetting. The real-time dispatch conversation and written estimate carry the rest.

Address

5150 SW 48th Way Suite 608, Davie, FL 33314, United States

Phone

+1 954-805-5291

Website

tinthauscustoms.com/contact-us/

Source depth

100 of 100

Indexable

Standalone profile

FL sits in the Permissive (sun-belt) band. Florida allows 28 % front and 15 % rear — among the most permissive in the country. Reflectivity caps still apply at 25 %.

Across all fifty states, the only zone of the windshield where any non-reflective tint is legal is the strip above the AS-1 line — usually four to five inches at the top, marked on factory glass with a small "AS-1" etching. Below that line, windshield tint is not street-legal anywhere in the United States, regardless of state side-glass rules. A reputable shop will measure from the AS-1 line down before laying film, not from the top of the glass.

Laws change. Confirm the most recent VLT minimum directly with the shop and, when in doubt, with the most recent text of your state's vehicle code.

1. Get PPF and tint quoted as separate jobs.Paint protection film and window tint are different installs in different bays with different cure windows. Bundling them on one invoice is fine, but the timeline and warranty paper should be split. Ask which film brand the PPF crew installs (XPEL, SunTek, STEK).
2. Confirm the shop measures front-window VLT before install.A shop that measures with a photometer before installation is the one most likely to keep you legal in your state. If they ask you to sign that compliance is on the customer, that's a quiet yellow flag. Tint stops are 28 % on the front in FL.
3. Ask the cure time and what to do during it.Newly installed film cures for 3 to 5 days in summer, 7 to 10 in winter. During cure, do not roll windows down — the film can shift and the squeegee margins can lift. Light hazing or small water bubbles in this window are normal and clear up; bubbles after 30 days are not.
4. Verify the AS-1 line on your windshield before booking strip tint.Across all 50 states, the only zone of the windshield where any tint is legal is above the AS-1 line — usually marked with a small "AS-1" etching at the top of factory glass. Below the AS-1 line, no tint is street-legal anywhere in the U.S., regardless of your state's VLT rule on side glass.
5. Pull a window seal vs. cut on glass — ask what the shop does.Cut-on-glass installs save 15 minutes but risk scoring the rubber seal with a razor. The cleaner method pulls the rear-side or rear-glass window down a half-inch so the cut happens off-glass. It costs the shop time, not money — confirm during the quote.