International Auto Glass & Window Tint

California and the broader Pacific-mixed climate (CA) blends coastal humidity, drought ordinances, and wildfire-season risks; local providers usually know the regional regulations better than imports. When you reach International Auto Glass & Window Tint in Long Beach, CA, the dispatch line will usually offer a general services menu. This page comes before that: documented signals, gaps, and the right questions. Service indicators documented for this listing: ceramic tint, heat rejection — 2 distinct cues. None of these confirm field execution; verify by asking the dispatch line for recent jobsite examples. Best-fit use cases (1): Automotive ceramic tint and heat rejection. If your situation does not fit, ask whether they actually take that kind of job before booking. Local Long Beach market conditions shape what a provider actually does day-to-day. A provider that explains those tradeoffs is worth more than one that quotes the cheapest job. This is an editorial snapshot, not a referral. Pricing, availability, and certifications may have changed since the public-source pass.

Address

1190 E Anaheim St, Long Beach, CA 90813, United States

Phone

+1 562-218-9295

Website

internationalautoglassandwindowtint.com/

Source depth

79 of 100

Indexable

Standalone profile

CA sits in the California-tier band. California Vehicle Code 26708 caps front-window VLT at 70 %, so practical front-side tint is essentially clear. Rear and rear-side glass have no limit. Medical exemptions exist with a doctor's certificate.

Across all fifty states, the only zone of the windshield where any non-reflective tint is legal is the strip above the AS-1 line — usually four to five inches at the top, marked on factory glass with a small "AS-1" etching. Below that line, windshield tint is not street-legal anywhere in the United States, regardless of state side-glass rules. A reputable shop will measure from the AS-1 line down before laying film, not from the top of the glass.

Laws change. Confirm the most recent VLT minimum directly with the shop and, when in doubt, with the most recent text of your state's vehicle code.

1. Ask for the IRR and TSER numbers on the spec sheet.Heat rejection at a given VLT comes from infrared rejection (IRR) and total solar energy rejected (TSER). The shop's top ceramic line will publish both numbers. A dyed film and a top ceramic at the same VLT can differ by 30 percentage points on TSER.
2. Confirm the shop measures front-window VLT before install.A shop that measures with a photometer before installation is the one most likely to keep you legal in your state. If they ask you to sign that compliance is on the customer, that's a quiet yellow flag. Tint stops are 70 % on the front in CA.
3. Ask the cure time and what to do during it.Newly installed film cures for 3 to 5 days in summer, 7 to 10 in winter. During cure, do not roll windows down — the film can shift and the squeegee margins can lift. Light hazing or small water bubbles in this window are normal and clear up; bubbles after 30 days are not.
4. Verify the AS-1 line on your windshield before booking strip tint.Across all 50 states, the only zone of the windshield where any tint is legal is above the AS-1 line — usually marked with a small "AS-1" etching at the top of factory glass. Below the AS-1 line, no tint is street-legal anywhere in the U.S., regardless of your state's VLT rule on side glass.
5. Pull a window seal vs. cut on glass — ask what the shop does.Cut-on-glass installs save 15 minutes but risk scoring the rubber seal with a razor. The cleaner method pulls the rear-side or rear-glass window down a half-inch so the cut happens off-glass. It costs the shop time, not money — confirm during the quote.