Window-tint installer directory SRS Racing Film Guide Ceramic film, UV protection, heat rejection & PPF — sourced from each shop's public record.
Home  /  All shops  /  NY Window-Film Report · Issue 09 · MAY 2026 · Lot #0069
Hemi’s General

Ceramic Auto Tint Installer

Hemi’s General

Hemi’s General appears in this directory for ceramic film and heat rejection and shows enough public material to evaluate before driving in.

Film tier ladder · 2 of 4 advertised Where this shop sits on the price-and-warranty curve
Entry — dyed film 5–10 yr life · color shift over time
Polyester base with dye for darkness. Cheapest install option, blocks some glare and UV but heat rejection is modest. The film fades — usually purple — within 5 to 10 years and the warranty rarely transfers.
Available Standard floor offering
Mid-grade — carbon film Stable color · moderate IR rejection
Carbon-pigment film holds color well and rejects more heat than dyed without using metal. No signal interference. The middle of the road for most enthusiast installs — better than dyed, half the price of ceramic.
Ask Likely stocked — confirm
Premium — ceramic Nano-ceramic · IRR ~50–70 %
Non-conductive nano-ceramic particles instead of metal. Full UV cut, real heat rejection by IR-spec sheet, no signal interference, no fade. The trade-off is price — about 2× a carbon film and 4× a dyed film.
Available Documented on shop's site
Top — nano-ceramic / hybrid IRR up to 96 % · transferable warranty
Top-tier ceramic or ceramic-IR hybrid lines. The warranty story is what changes — many in this tier are transferable to a second owner, and the spec sheet lists IR rejection up to the mid-90s. Worth the cost on a daily-driven sun-belt vehicle.
Ask No top-line evidence — confirm by phone
After Hours Appointments | Send a text if we miss your call Syracuse Window Tinting Home Window Tinting All packages based upon a minimum shop rate of $95 an hour. Service overview Window Tinting Pros of Syracuse Window
From Hemi’s General's shop website
Facts on file

What we have, where it came from

Address
342 Main St, Phoenix, NY 13135, United States
Source depth
100 of 100
Indexable
Standalone profile
State law · NY

Tint rules in NY — and why the AS-1 line is universal

NY sits in the Northeast-strict band. New York enforces the 70 % front rule with photometers at annual inspection.

Across all fifty states, the only zone of the windshield where any non-reflective tint is legal is the strip above the AS-1 line — usually four to five inches at the top, marked on factory glass with a small "AS-1" etching. Below that line, windshield tint is not street-legal anywhere in the United States, regardless of state side-glass rules. A reputable shop will measure from the AS-1 line down before laying film, not from the top of the glass.

Laws change. Confirm the most recent VLT minimum directly with the shop and, when in doubt, with the most recent text of your state's vehicle code.

OpenStreetMap · drag to explore · Get directions

Buyer notes · before you book

Six questions worth asking before the deposit

  1. Ask for the IRR and TSER numbers on the spec sheet.Heat rejection at a given VLT comes from infrared rejection (IRR) and total solar energy rejected (TSER). The shop's top ceramic line will publish both numbers. A dyed film and a top ceramic at the same VLT can differ by 30 percentage points on TSER.
  2. Get PPF and tint quoted as separate jobs.Paint protection film and window tint are different installs in different bays with different cure windows. Bundling them on one invoice is fine, but the timeline and warranty paper should be split. Ask which film brand the PPF crew installs (XPEL, SunTek, STEK).
  3. Confirm the shop measures front-window VLT before install.A shop that measures with a photometer before installation is the one most likely to keep you legal in your state. If they ask you to sign that compliance is on the customer, that's a quiet yellow flag. Tint stops are 70 % on the front in NY.
  4. Ask the cure time and what to do during it.Newly installed film cures for 3 to 5 days in summer, 7 to 10 in winter. During cure, do not roll windows down — the film can shift and the squeegee margins can lift. Light hazing or small water bubbles in this window are normal and clear up; bubbles after 30 days are not.
  5. Verify the AS-1 line on your windshield before booking strip tint.Across all 50 states, the only zone of the windshield where any tint is legal is above the AS-1 line — usually marked with a small "AS-1" etching at the top of factory glass. Below the AS-1 line, no tint is street-legal anywhere in the U.S., regardless of your state's VLT rule on side glass.
  6. Pull a window seal vs. cut on glass — ask what the shop does.Cut-on-glass installs save 15 minutes but risk scoring the rubber seal with a razor. The cleaner method pulls the rear-side or rear-glass window down a half-inch so the cut happens off-glass. It costs the shop time, not money — confirm during the quote.

About this profile. Built from Hemi’s General's public website and Google Maps page. Source depth 100 of 100. No referral fees, no advertorial. Tell us if anything is wrong and we'll fix it.

On the same drive · NY More from this issue